Room A118-102, 4th Floor, Joint Inspection Building, Haikou Comprehensive Bonded Zone, Haikou, Hainan.
| Uri | Item | detalye | QTY | Yunit | |
| 2.3~2.5mmMain Frame na istraktura | Mga panlabas na sukat(mm)外 | 5800 2500 * * 2490mm | / | ||
| Panloob na laki(mm) | 5615 2480 * * 2275mm | / | |||
| Natitiklop na estado(mm) | 5800 2500 * * 460mm | / | |||
| Kabuuang masa (kg) | 1100 | / | |||
| Nangungunang frame | 2.3mm kapal galvanized crossbeam, mass ng Zn coat:80g/㎡, 150mm(W)*5500mm(L) | PCS | 2.00 | ||
| 2.3mm kapal galvanized crossbeam, mass ng Zn coat:80g/㎡, 150mm(W)*2194mm(L) | PCS | 2.00 | |||
| Galvanized stull 30*50*1.2mm, mass ng Zn coat:80g/㎡ | PCS | 5.00 | |||
| 20*30*1.2mm镀锌方管,镀锌含量80g/㎡Galvanized square pipe 20*30*1.2mm, mass ng Zn coat:80g/㎡ | PCS | 6.00 | |||
| Galvanized square pipe 20*30*1.0mm, mass ng Zn coat:80g/㎡ | PCS | 2.00 | |||
| Galvanized square pipe 20*30*1.0mm, mass ng Zn coat:80g/㎡ | PCS | 2.00 | |||
| 831 tile sa kisame(0.3mm) | ㎡ | 18.00 | |||
| 75mm kapal pagkakabukod rock lana | ㎡ | 18.00 | |||
| 50 type overhead rail,5595mm (L), mass ng Zn coat:80g/㎡ | PCS | 2.00 | |||
| Nakasabit na gulong | PCS | 4.00 | |||
| connector | PCS | 8.00 | |||
| Ibabang frame | 2.5mm kapal galvanized crossbeam, mass ng Zn coat:80g/㎡, 150mm(W)*5800mm(L) | PCS | 2.00 | ||
| 2.5mm kapal galvanized crossbeam, mass ng Zn coat:80g/㎡, 150mm(W)*2494mm(L) | PCS | 2.00 | |||
| Lower crossbeam angle steel na natitiklop na bahagi, 5800mm | PCS | 2.00 | |||
| Lower crossbeam angle steel na natitiklop na bahagi, 2494mm | PCS | 2.00 | |||
| Galvanized square tube 40*60*1.7mm galvanized cross brace, galvanized na nilalaman 80g/m2 | PCS | 11.00 | |||
| Haligi | 2.3mm kapal galvanized column, mass ng Zn coat:80g/㎡, 150mm(W)*2195mm(H) | PCS | 4.00 | ||
| 8.0mm kapal connector, mass ng Zn coat:80g/㎡ | PCS | 8.00 | |||
| Galvanized corner fitting | 3.0mm upper concern fitting, mass ng Zn coat:80g/㎡, 150*150*140mm | PCS | 4.00 | ||
| 3.0mm lower concern fitting, mass of Zn coat:80g/㎡, 150*150*150mm | PCS | 4.00 | |||
| Iisang tile capping | Top skin 0.4mm color steel single tile, arch top, drainage sa paligid | Itakda | 1.00 | ||
| 0.47mm na kulay na bakal na solong tile, corrugated tile arch, espesyal na hindi tinatagusan ng tubig na paraan | Itakda | 1.00 | |||
| Patunay-kahalumigmigan | Moisture-proof na pelikula: PE resin film 1.0mm | Itakda | 1.00 | ||
| kulay | Baking paint (electrostatic spraying) | Itakda | 1.00 | ||
| tornilyo | Hexagon socket | PCS | 48.00 | ||
| Downspout | Downspout | 50 uri ng downspout | PCS | 4.00 | |
| Espesyal na Z-shaped na bahagi | Z-shaped na mga bahagi | 0.8mm Z-shaped fixed ceiling tile | PCS | 4.00 | |
| Floor | sahig ng MGO | 16mm kapal, 2440*1120mm | PCS | 5.00 | |
| Floor | Pvc na sahig | 1.6mm na kapal ng pvc na sahig | Itakda | 1.00 | |
| Panloob na sulok trim | Panloob na sulok trim | Pvc panloob na sulok trim | PCS | 4.00 | |
| Ng | Mataas na kalidad na bakal na pinto | Steel na pinto 920*2030mm (950 type na wall panel) | Itakda | 1.00 | |
| Bintana | Plastic na bakal na bintana | Single glass-sliding window, 950*1200mm (950 type na wall panel) | Itakda | 2.00 | |
| Mga pandiwang pantulong na materyales | mga pandiwang pantulong na materyales | Mga tornilyo, sealant, at panloob na konektor ng lalagyan. | Itakda | 1.00 | |
| electrical sistema | electrical sistema | Isang distribution box J-6, isang leakage protection (32A), 2 five hole(10A), 2 switch, 1 three hole(16A), at dalawang LED lights | Itakda | 1.00 | |
| Panel sa dingding | 1150 type (H-connection port) | 50mm rock wool, 0.3mm na kapal na double-sided steel sheet, density 50kg/m ³ | Itakda | 1.00 | |
| Teknikal na parameter | Bearing ng bubong:≧50Kg/m² | ||||
| Floor load-bearing: ≧150Kg/m² | |||||
| Walkway bearing: ≧200公斤Kg/m² | |||||
| Presyon sa dingding: ≧80公斤/m² | |||||
| Rating ng sunog: Isang antas | |||||
| Wall deformation coefficient: ≦300Kg/m² | |||||
| Seismic grade: 10 level | |||||
| Wind loading: 12 level | |||||
Copyright © CDPH (Hainan) Company Limited Lahat ng Karapatan ay Nakalaan
EN
